Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design

Metals and Materials International - High-entropy alloys having excellent properties are particularly suitable for the application as the filler metals in welding. In the present study,...     

Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs

A novel low-temperature sealing method was developed to seal solid oxide fuel cells. The 3D Ni nanosheet array was pre-fabricated on faying surfaces of Crofer22APU interconnect and NiO-YSZ anode-support. Then it was covered with Au film without changing its morphology. This special nanostructure improved sintering efficiency between Ag nanoparticles and substrates. A dense joint was obtained at the low-temperature between 250 °C–300 °C. This method effectively avoided the oxidation of interconnect during sealing. When joints were sealed at 300 °C, the shear strength reached 16 MPa. The fracture was mainly located in the central Ag layer, presenting a significant plastic deformation. Due to the effective protection of Ni layer, joints also possessed excellent oxidation resistance in oxidizing atmosphere at 800 °C for 400 h. After high-temperature oxidation, the shear strength was increased to 23 MPa, revealing an increasement of 43.8% compared with the as-sealed condition (16 MPa). This sealing method has great potential in sealing solid oxide fuel cells. It also can be extended to seal other energy-conversion devices.     

An easy and scalable approach to synthesize three-dimensional sandwich-like Si/Polyaniline/Graphene nanoarchitecture anode for lithium ion batteries

A new three-dimensional (3D) sandwich-like Si/Polyaniline/Graphene nanoarchitecture anode for lithium ion batteries (LIBs) is successfully fabricated through an easy approach. In this nanoarchitecture, the in-situ polymerized electronic conductive polyaniline (PAni) hydrogel, acting as “glue”, agglutinates tightly to both the silicon nanoparticles (SiNPs) and graphene sheets, forming efficient conductive networks with high elastic modulus and high tensile strength. This mechanically robust nanoarchitecture can endure the great volume change of silicon and retain structural stability during Li-ion insertion/extraction. The electrodes consisting of this 3D sandwich-like Si/Polyaniline/Graphene nanoarchitecture reveal excellent electrochemical performance. The progress made in this work provides an easy and scalable route for preparing Si-based anode materials with high performance for advanced LIBs.     

Preparation and properties of Eu and Dy co-doped strontium aluminate long afterglow nanomaterials

The long afterglow nanomaterials of strontium aluminate co-doped by Eu and Dy have been synthesized by co-precipitation combined hydrothermal method. The effects of hydrothermal time, calcination time, pH value, the amount of aluminum nitrate, activator, co-activator and flux H₃BO₃ on the fluorescence properties of the product were investigated by means of single factor optimization experiment. Then the orthogonal experiment was employed to obtain the optimal synthesis conditions that are as follows: n_Dy/n_Eu = 2.5, t_c = 2.5?h, n_Eu/n_Sr = 0.02, t_h = 8?h. Subsequently, the optimal synthesis conditions were verified by three repeated experiments, and the obtained products were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer. The results showed that the synthesized target products all were the mixed crystal phase of SrAl₂O₄ and Sr₄Al_l4O₂₅. The particles presented regular spherical-like with size ~ 100?nm. The dopants Eu and Dy were confirmed existed in the SrAl₂O₄ powders. The fluorescence and afterglow data of the target products were better than that in the orthogonal experiment scheme. The primary emission spectra band was in the range of 400–600?nm with characteristic peak located at ~ 460?nm corresponding to the transitions of Eu²⁺ ions from 4f⁶5d→4f⁷, and the blue light can be observed by naked eyes. The similar fast-decaying and slow-decaying processes were displayed in all the afterglow curves, and the initial afterglow brightness of the target product is apparently higher than that of products synthesized by the orthogonal experiment. The synthesized target products, which show excellent long afterglow performance, present a great application prospects in the aspects of ceramics, plastics, arts and crafts, ink and coating.